ControlReady - Digital Audio Delivery, Radio Automation, Streaming and Music Scheduling

SRC-2 low cost dual input GPI

SRC-2    Low Cost Dual input GPI $129.00

The tiny TOOLS SRC-2 interfaces two optically isolated inputs and two SPST relays to a RS-232 or USB port. The SRC-2 can notify ControlReady or AirCheckReady that any of two optically isolated inputs have been opened or closed and also allows your software to control two SPST, 1-amp relays. Communication with the SRC-2 is accomplished via short "burst" type ASCII commands from the users PC.



This is a low cost way to let our software monitor/detect two closures for example if monitoring a microphone to do airchecks, or if you have a single satellite network that only requires two different triggers (breaks and ids, etc.).

Note: Any combination of up to 4 broadcast tools devices can be connected to our software, so you can always add other devices if your needs grow.   For more logic inputs/outputs, consider a full featured switcher like the SS 4.2 or other switchers which have 8 to 16 or more logic channels.
Please note: The SRC2 has programmable output strings, and you have to program the device when it is installed to send specific commands.

For instructions on using the SRC-2 with ControlReady or AircheckReady - see the link to the document below:
SRC-2 Manual