Sometimes you may wish to add your own custom categories to the list of categories 
that is included with your software.  To do this follow these steps:


1)  From the F:\WIRE\INSTALL\COMMAND\> prompt, type the following                  
    command:  TYPE $SPECIAL.CMD.  Press <ÄÙ.

2)  These first four lines should appear on the screen:


    s @\users\#\$config.wr a
    a @\users\#\$config.wr @\system\$config.wr a

    s @\capture\$config.wr a
    a @\capture\$config.wr @\system\$config.wr a
 
       IF THESE LINES TO NOT READ EXACTLY LIKE THIS THEN DO NOT          
       PROCEED ANY FURTHER.  GIVE WIREREADY A CALL BEFORE                  
       PROCEEDING.  YOU MAY HAVE A OTHER LINES, BUT THESE FOUR         
       MUST BE THERE.
 
3)  Follow the included instructions on how to enter the SETUP program.

4)  From the main menu at the SETUP program, highlight the SET CUSTOM 
CATEGORIES and press <ÄÙ.  A box will appear similar to this:



                  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
                  ³                                        ³
                  ³           Custom Categories            ³
                  ³                                        ³
                  ³                                        ³
                  ³  Slot1                      Unused     ³
                  ³  Slot2                      Unused     ³
                  ³  Slot3                      Unused     ³
                  ³  Slot4                      Unused     ³
                  ³  Slot5                      Unused     ³
                  ³  Slot6                      Unused     ³
                  ³  Slot7                      Unused     ³
                  ³  Slot8                      Unused     ³
                  ³  Slot9                      Unused     ³
                  ³  Slot10                     Unused     ³
                  ³  Slot11                     Unused     ³
                  ³  Slot12                     Unused     ³
                  ³                                        ³
                  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
 






5)  To ADD/CHANGE the categories, highlight the categories you wish to change OR   
    highlight an UNUSED slot to ADD a new category and press <ÄÙ.  (The listing          
   continues if you press PgDn.

6)  Type in the name you want and press <ÄÙ.

7)  When are finished, press F3.

8)  Press F4.

9)  Press ESC once.

10) At the menu highlight the USER MAINTENANCE option and press <ÄÙ.  A box     
    will appear looking like this:


                                  ÚÄÄÄÄÄÄÄÄ¿
                                  ³Add     ³
                                  ³Delete  ³
                                  ³Custom  ³
                                  ÀÄÄÄÄÄÄÄÄÙ
    NOTE: WireReady NSI has recently changed its Setup program. If you do not see a 
choice Custom in this menu, call WireReady NSI for assistance.


11)  Highlight the CUSTOM option and press <ÄÙ.

12)  Using F9 (deselect\select all) and the SPACEBAR (deselect\select one), select the   
     users whose categories you wish to change.  When finished selecting the users,          
     press <ÄÙ (usually all users have access to these categories).

13)  Press ESC TWICE.

14)   If you are at a workstation, type RUNWR or LOADCART (depending on               
      whether or not you are using CartReady; see your computer engineer for                   
      assistance) and press <ÄÙ.