The BELL MT202T Modem converts audio to serial output.

On the back of the modem there is a 9 pin connector that has a cord coming out of it with 4 
loose wires.  They should be Red, Green, Black, and White.  DO NOT USE the RED and 
GREEN wires!  Take the White and Black wires and connect them to the audio output 
terminals on the back of the satellite receiver.

The modem outputs on a straight-through serial cable which connects to your computer's 
serial port.

Once all of the above is complete, you can call us; and we will walk you through configuring 
WireReady to accept the Michigan Dataserv service.

































 		QA4  SAF    TECHDOCS\FAXBACK\DATASERV.1  Rev.A  3/96  1 of 1