Please Note:  Basics on connecting Wire services to our DOS based or WIN based capture programs are found below on the bottom half of this page  When configuring wire services for our DOS based manager program you use the SETUP.EXE program.  To configure wire services for our WINCAP 32 bit capture program you must use the install\SETUP32.EXE program.

Setting up Wire Services (DOS or WIN)

The following documents deal with items that are accessed through the Setup program.  If you do not know how to enter the Setup
program, download one of the first two documents.  If you are running on a stand-alone computer download the first document.  If you are running on a LAN system, download the second document.