The following documents deal with setting up wire services.  Some of these documents may be dated. If the information doesn't match your receiver/setup, exactly, please call us for more information.

Note: if you are setting up WINCAP, our 32 bit capture program it's assumed you will be running SETUP32 our windows configuration program (wire\install\setup32.exe), disregard any specific mention to using the SETUP program which is used exclusively for setting up services/ports for the DOS program.

If you use our DOS program, it is assumed you will be using the SETUP.EXE program which is found in either C:\WIRE for stand-alone users, or wire\install\setup.exe if you run a multi-user configuration on a LAN.